Jahresbibliographie 2000

Veröffentlichungen von
Angehörigen der Hochschulen des Saarlandes

Werkstoffwissenschaften und Fertigungstechnik (07.06.01)

Aegerter, Michael André
- Deposition of optical microcomponents by ink-jet processes / von Rolf
Danzebrink; Michael André Aegerter. - In: Proceedings of the 3rd International
Conference on Coatings on Glass : Advanced Coatings on Glass and Plastics for
Large-Area or High-Volume Products, October 29-November 2, 2000, Maastricht,
NL / Ed.: Meinema, H.A.; Spee, C.I.M.A.; Aegerter, M.A. - Veenendaal, NL :
Universal Press, 2000, S. 265-269
 
- Electrochromic properties of Nb2O5 and Nb2O5:X sol-gel coatings
(X=Sn,Zr,Li,Ti,Mo) / von Michael Schmitt; Michael André Aegerter. - In:
Switchable materials and flat panel displays : 21-22 July 1999 Denver,
Colorado / Ed.: Lampert, Carl M. - Bellingham, WA : SPIE, 1999, S. 93-102. -
(SPIE Proceedings ; 3788)
 
- Herstellung von grossflaechigen und antistatisch-glanzmindernden (ASAG)
ITO Schichten / von Christian Göbbert; Harish Bisht; N. Al-Dahoudi; Michael
André Aegerter. - In: Glastechnische Tagung <74, 2000, Ulm> : Kurzreferate. -
Frankfurt/M : Deutsche Glastechnische Gesellschaft, 2000, S. 294-297
 
- Herstellung von optischen Mikrokomponenten durch Ink-jet-Verfahren / von
Rolf Danzebrink; Michael André Aegerter. - In: Glastechnische Tagung <74,
2000, Ulm> : Kurzreferate. - Frankfurt/M : Deutsche Glastechnische
Gesellschaft, 2000, S. 298-301
 
- Low optical loss planar waveguides prepared in an organic-inorganic hybrid
system / von S.J.L. Ribeiro; Y. Messaddeq; R.R. Goncalves; M. Ferrari; M.
Montagna; Michael André Aegerter. - In: Applied Physics Letters, 77 (2000),
22, S. 1-3
 
- Nanocrystalline sol-gel Nb2O5 films for photovoltaic energy conversion /
von Yeping Guo; Michael André Aegerter. - In: Functional materials / Ed.:
Grassie, K.; Teuckhoff, E.; Wegner, G.; Haußelt, J.; Hanselka, H. - Weinheim :
Wiley-VCH, 2000, S. 250-255. - ((Euromat 99) ; 13)
 
- NMR study of ion-conducting organic-inorganic nanocomposites poly(ethylene
glycol)-Silica-LiClO4 / von Nilson C. Mello; Tito J. Bonagamba; Horácio
Panepucci; Karim Dahmouche; Patrick Judeinstein; Michael André Aegerter. - In:
Macromolecules, 33 (2000), 4, S. 1280-1288
 
- Preparation of conducting ultrafiltration membranes from redispersable,
nanoscaled, crystalline SnO2:Sb particles / von Christian Göbbert; Detlef
Burgard; Rüdiger Nass; Michael André Aegerter; Helmut Schmidt. - In: Ceramics:
Getting into the 2000's : Proceedings of the World Ceramics Congress, part of
the 9th CIMTEC-World Ceramics Congress and Forum on New Materials Florence,
Italy june 14-19, 1998 : Part D including: Section I-Structural Ceramics,
Section J-Ceramics for Process Engineering, Chemical and Environmental
Applications, Section SM- Standards and Markets for ATCs / Ed.: Vincenzini, P.
- Faenza : Techna, 1999, S. 441-448. - ((Advances in science and technology) ;
16)
 
- Properties of electrochromic devices made with Nb2O5 and NB2O5:X (X=Li,Ti
or Mo) as coloring electrode / von Michael Schmitt; Michael André Aegerter. -
In: Switchable materials and flat panel displays : 21-22 July 1999 Denver,
Colorado / Ed.: Lampert, Carl M. - Bellingham, WA : SPIE, 1999, S. 75-83. -
(SPIE Proceedings ; 3788)
 
- Revetements fonctionnels déposés sur les verres par des techniques sol-gel
/ von Michael André Aegerter; Martin Mennig; Peter Müller; Helmut Schmidt. -
In: Verre, 6 (2000), 5, S. 30-37
 
- Transparent conducting, antistatic and antistatic-antiglare coatings on
plastic substrates / von N. Al-Dahoudi; Harish Bisht; Christian Göbbert;
Thomas Krajewski; Michael André Aegerter. - In: Proceedings of the 3rd
International Conference on Coatings on Glass : Advanced Coatings on Glass and
Plastics for Large-Area or High-Volume Products, October 29-November 2, 2000,
Maastricht, NL / Ed.: Meinema, H.A.; Spee, C.I.M.A.; Aegerter, M.A. -
Veenendaal, NL : Universal Press, 2000, S. 555-561
 
- Eigene_Liste: http://www.uni- saarland.de/fak8/wwthd/
publications.uk.html
 
- Eigene_Liste: http://www.uni- saarland.de/fak8/lmw/dokumente/
pub95.htm
 
- Eigene_Liste: http://www.uni-saarland.de/fak8/fuwe/publikationen/
inhalt.html
 
- Eigene_Liste: http://www.uni-saarland.de/
fak8/powdertech/veroeffentlichungen_client.html
 
Aubertin, Frank
- Titanium `99 Science and Technology, : Proc. of the Ninth World Conf. on
Titanium / Ed.: Garynin Ushkov. - St. Petersburg : CRISM, Prometey, 2000, S.
1882-1889
 
Avgoustinov, Nikolay
- Eigene_Liste: http://www.cam.uni-sb.de/mitarbeiter/
avgoustinov.html
 
- Acquisition and Organization of Conversion-Related Knowledge / von Nikolay
Avgoustinov; Helmut Bley. - In: Proceedings of the CIRP International Seminar
on Quality Manufacturing Systems. 1999
 
- Computer Aided Information Exchange for Manufacturing Software Systems /
von Nikolay Avgoustinov; Helmut Bley. - In: Proceedings of the 31th CIRP
International Seminar on Manufacturing Systems. 1998
 
- Virtual Shaping and Virtual Verification of NC-Programs. - In: Proceedings
of the 31th CIRP International Seminar on Manufacturing Systems. 1998
 
- VRML as Means of Efficient 4D Machining Simulation in Intranet/Internet. -
In: X Workshop on Supervising and Diagnostics of Machining Systems, Inovative
and Integrated Manufacturing. 1999
 
- VRML as Means of Expressive 4D Illustration in CAM Education. - In: Future
Generation Computer Systems (special issue of the magazine). 2000
 
Behrning, Stefan
- Eigene_Liste:
http://www.cam.uni-sb.de/mitarbeiter/behrning.html
 
- Innovative High-Performance Process for Dry Manufacturing of Sheet Metal
Armatures and theit Integrated On-Line Cleanliness Examination / von Stefan
Behrning; Helmut Bley. - In: Proceedings of the 7th International Conference
on Sheet Metal, 9 (1999), S. 229-238
 
- Method for Acquiring Values Describing Surface Cleanliness / von Stefan
Behrning; Helmut Bley; Peter Braun. - In: Proceeding of the 10th International
Coloquium on Surfaces and Tutorials. 2000, S. 230-238
 
- Methods for Qualitative and Quantitative Analysis of Lubricants and
Contamination on Formed Surfaces / von Helmut Bley; Stefan Behrning. - In:
Proceedings of the 6th Conference on Sheet Metal, 1 (1998), S. 343ff
 
Beinstingel, Silke
- Investigations of Vibration Induced Particle Segregation for the
Processing of FGM. (International Symposium on Functionally Graded Materials) /
von Frank Mücklich; Silke Beinstingel; Walter Arnold - In: Kaysser W.A.
(Hrsg.) ; Institute of Materials Science; German Aerospace Center (DLR):
Functionally Graded Materials 1998 : Proceedings of the 5th International
Symposium on Functionally Graded Materials Hampshire : Trans Tech
Publications, 1999, S. 25-30
 
Biehl, Volker
- Eigene_Liste: http://www.uni-saarland.de/fak8/lmw/
vobi/files/veroeffentlichungen.htm
 
- Influence of titanium-vanadium alloys on cell morphologie: electron
microscopy and ESCA studies / von Karin Schenk-Meuser; Heinz Duschner; Volker
Biehl; Eva Eisenbarth; Jürgen Breme. - In: Surface and Interface Analysis.
2000, 30, S. 29-31
 
- Mechanische und klinische Aspekte bei koronaren Stents / von Volker Biehl;
Thilo Wack; Ulrich Theo Seyfert; Jürgen Breme. - In: Berichtsband
"Implantologie: Mechanische und klinische Aspekte von Implantaten" : 2. Tagung
des DVM-Arbeitskreises "Biowerkstoffe". - Berlin : DVM, 2000, S. 171-180
 
- Metalle und mechanische Oberflaechenmodifikation / von Jürgen Breme; Eva
Eisenbarth; Volker Biehl. - In: Biomaterialien. 2000, 1, S. 48-53
 
- Tailored Composite Titanium-Based Biomaterials / von Jürgen Breme; Volker
Biehl; Thilo Wack; Eva Eisenbarth. - In: Tailored Composite Titanium-Based
Biomaterials : Titanium `99 Science and Technology, Proc. of the Ninth World
Conf. on Titanium / Ed.: Garynin Ushkov. - St. Petersburg : CRISM, Prometey,
2000, S. 1187-1194
 
- Tailor-Made composites Based on Titanium for medical Devices / von Jürgen
Breme; Volker Biehl; Andreas Hoffmann. - In: Advanced Eng.Materials. 2000, 2,
S. 270-274
 
Bley, Helmut
- Eigene_Liste: http://www.cam.uni- sb.de/publikationen/
publikationen.html
 
- Acquisition and Organization of Conversion-Related Knowledge / von Nikolay
Avgoustinov; Helmut Bley. - In: Proceedings of the CIRP International Seminar
on Quality Manufacturing Systems. 1999
 
- Automatic Solution Generator for Complex Logistical Planning Problems /
von Helmut Bley; Claas-Christian Wuttke; M. Kontz. - In: Proceedings of the
CIRP International Seminar on Intelligent Computation in Manufacturing
Engineering. 1998, S. 297-302
 
- Automation of Simulation Studies / von Helmut Bley; Christina Franke;
Claas-Christian Wuttke; A. Gross. - In: Proceedings of the 2nd CIRP
International Seminar on Intelligent Computation in Manufacturing. 2000
 
- Computer Aided Information Exchange for Manufacturing Software Systems /
von Nikolay Avgoustinov; Helmut Bley. - In: Proceedings of the 31th CIRP
International Seminar on Manufacturing Systems. 1998
 
- Design and Application of a Quality Management Network Model for the
Assurance of Quality Affecting Processes Demonstrated in the Case of Powder
Metallurgy / von Helmut Bley; Dieter Jung. - In: Proceedings of the 31th CIRP
International Seminar on Manufacturing Systems. 1998
 
- Determination of technological data during NC programming based on CAD-
integrated tolerances / von Helmut Bley; Ralf Oltermann. - In: Proceedings of
the 14th International Conference on Computer-Aided Production Engineering.
1998
 
- Distributed Model Management System for Material Flow Simulation / von
Helmut Bley; Ralf Oltermann; Claas-Christian Wuttke. - In: Proceedings of the
15th International Conference on Computer-Aided Production Engineering. 1999,
S. 657-662
 
- Innovative High-Performance Process for Dry Manufacturing of Sheet Metal
Armatures and theit Integrated On-Line Cleanliness Examination / von Stefan
Behrning; Helmut Bley. - In: Proceedings of the 7th International Conference
on Sheet Metal, 9 (1999), S. 229-238
 
- Integration der operativen Ebenen in Simulationsprojekte / von Helmut
Bley; Christina Franke; Claas-Christian Wuttke. - In: Industrie Management 2/
2000. 2000, S. 13-17
 
- Materialflußsimulation verbessert Logistik / von Helmut Bley; Peter Braun;
Claas-Christian Wuttke. - In: Bleche Rohre Profile, 9 (1999), S. 46-53
 
- Method for Acquiring Values Describing Surface Cleanliness / von Stefan
Behrning; Helmut Bley; Peter Braun. - In: Proceeding of the 10th International
Coloquium on Surfaces and Tutorials. 2000, S. 230-238
 
- Methods and Tools for the Building of Huge Simulation Models / von Helmut
Bley; Christina Franke; A. Ostermann; Claas-Christian Wuttke. - In:
Proceedings of the 2nd CIRP International Seminar on Intelligent Computation
in Manufacturing. 2000
 
- Methods for Qualitative and Quantitative Analysis of Lubricants and
Contamination on Formed Surfaces / von Helmut Bley; Stefan Behrning. - In:
Proceedings of the 6th Conference on Sheet Metal, 1 (1998), S. 343ff
 
- Modelling Quality in Complex Processes - Opimization of a Powder
Metallurgical Process using DoE / von Helmut Bley; Dieter Jung; P. Klär. - In:
International Conference on Quality Manufacturing. 1999
 
- Multiple use of simulation models for production systems / von Helmut
Bley; Claas-Christian Wuttke. - In: Proceedings of the 32nd CIRP International
Seminar on Manufacturing Systems. 1999, S. 379-388
 
- New strategies and tools for increasing simulation efficiency / von Helmut
Bley; Christina Franke; Claas-Christian Wuttke. - In: Annals of the CIRP, 49
(2000), 1
 
- Simulation als Werkzeug zur Optimierung inner- und zwischenbetrieblicher
Logistik in der Blechverarbeitung / von Helmut Bley; Peter Braun; Claas-
Christian Wuttke. - In: Tagungsband zum EFB-Kolloquium '99. 1999
 
- Solving the Information Management Problem in the Digital Factory / von
Helmut Bley; Christina Franke; Claas-Christian Wuttke. - In: Proceedings of
the 33rd CIRP International Seminar on Manufacturing Systems. 2000, S. 357-362
 
Bockenheimer, Clemens
- Does non-linear ultrasound detect ageing of adhesive bonds before failure?
/ von Clemens Bockenheimer; Davis Fata; Wulff Possart; M. Rothenfußer. - In:
Preprints, EURADH `2000 5th European Adhesion Conference, Société Française
d'Adhésion, Dechema e.V., Fachsektion Klebtechnik, Deutschland, The Institute
of Materials, UK, Lyon, France, 18.-21.9.00. 2000, S. 634-638
 
- Eigenschaften von Al-Epoxid-Klebungen nach mechanischer
Oberflächenvorbehandlung / von Clemens Bockenheimer; Torsten Neeb; Wulff
Possart; Bernd Valeske. - In: Proceedings 14. Internat. Symposium
"SWISSBONDING '00", 16. - 18.05.2000. - Rapperswil, Schweiz, 2000, S. Poster
Nr. 11
 
- The influence of mechanical pretreatment on the polymer structure of
adhesive bonds / von Clemens Bockenheimer; Wulff Possart; Bernd Valeske. - In:
Preprints, EURADH `2000 5th European Adhesion Conference, Société Française
d'Adhésion, Dechema e.V., Fachsektion Klebtechnik, Deutschland, The Institute
of Materials, UK, Lyon, France, 18.-21.9.00. 2000, S. 88-94
 
- Influences from metal surfaces on the curing of polymer adhesives / von
Clemens Bockenheimer; Wulff Possart; Bernd Valeske. - In: Proc., 1. Internat.
Symposium on "Reactive Polymers in Inhomogeneous Systems, in Melts and at
Interfaces", Dresden, 16. - 19.07.2000. - Dresden, 2000, L31
 
- Surface modification of metals by mechanical pretreatments / von Clemens
Bockenheimer; Walter Brockmann; Torsten Neeb; Wulff Possart; Bernd Valeske. -
In: Proceedings of the 23rd Annual Meeting of the Adhesion Society 2000 / Ed.:
Anderson, G.L. - Myrtle Beach, South Carolina : The Adhesion Society, 2000, S.
437-440
 
Breme, Jürgen
- Eigene_Liste: http://www.uni- saarland.de/fak8/lmw/dokumente/
pub95.htm
 
- Brazing of Titanium with New Biocompatible Brazing Filler Alloys / von
Heinz Müller; Jürgen Breme. - In: Titanium `99 Science and Technology, : Proc.
of the Ninth World Conf. on Titanium / Ed.: Garynin Ushkov. - St. Petersburg :
CRISM, Prometey, 2000, S. 1758-1765
 
- Influence of titanium-vanadium alloys on cell morphologie: electron
microscopy and ESCA studies / von Karin Schenk-Meuser; Heinz Duschner; Volker
Biehl; Eva Eisenbarth; Jürgen Breme. - In: Surface and Interface Analysis.
2000, 30, S. 29-31
 
- Mechanische und klinische Aspekte bei koronaren Stents / von Volker Biehl;
Thilo Wack; Ulrich Theo Seyfert; Jürgen Breme. - In: Berichtsband
"Implantologie: Mechanische und klinische Aspekte von Implantaten" : 2. Tagung
des DVM-Arbeitskreises "Biowerkstoffe". - Berlin : DVM, 2000, S. 171-180
 
- Metalle und mechanische Oberflaechenmodifikation / von Jürgen Breme; Eva
Eisenbarth; Volker Biehl. - In: Biomaterialien. 2000, 1, S. 48-53
 
- Optimized Fatigue Strength of Porous Coated TiAl5Fe2.5 Samples Produced by
Sintering / von Andreas Hoffmann; Michael Hamentgen; Jürgen Breme. - In:
EUROMAT Vol.2 : Materials for Medical Engineering / ED.: Stallforth Revell. -
Weinheim : WILEY-VCH, 2000, S. 59-64
 
- Tailored Composite Titanium-Based Biomaterials / von Jürgen Breme; Volker
Biehl; Thilo Wack; Eva Eisenbarth. - In: Tailored Composite Titanium-Based
Biomaterials : Titanium `99 Science and Technology, Proc. of the Ninth World
Conf. on Titanium / Ed.: Garynin Ushkov. - St. Petersburg : CRISM, Prometey,
2000, S. 1187-1194
 
- Tailor-Made composites Based on Titanium for medical Devices / von Jürgen
Breme; Volker Biehl; Andreas Hoffmann. - In: Advanced Eng.Materials. 2000, 2,
S. 270-274
 
- Titanium `99 Science and Technology, : Proc. of the Ninth World Conf. on
Titanium / Ed.: Garynin Ushkov. - St. Petersburg : CRISM, Prometey, 2000, S.
1882-1889
 
Eisenbarth, Eva
- Influence of titanium-vanadium alloys on cell morphologie: electron
microscopy and ESCA studies / von Karin Schenk-Meuser; Heinz Duschner; Volker
Biehl; Eva Eisenbarth; Jürgen Breme. - In: Surface and Interface Analysis.
2000, 30, S. 29-31
 
- Metalle und mechanische Oberflaechenmodifikation / von Jürgen Breme; Eva
Eisenbarth; Volker Biehl. - In: Biomaterialien. 2000, 1, S. 48-53
 
- Tailored Composite Titanium-Based Biomaterials / von Jürgen Breme; Volker
Biehl; Thilo Wack; Eva Eisenbarth. - In: Tailored Composite Titanium-Based
Biomaterials : Titanium `99 Science and Technology, Proc. of the Ninth World
Conf. on Titanium / Ed.: Garynin Ushkov. - St. Petersburg : CRISM, Prometey,
2000, S. 1187-1194
 
Franke, Christina
- Eigene_Liste:
http://www.cam.uni-sb.de/mitarbeiter/franke.html
 
- Automation of Simulation Studies / von Helmut Bley; Christina Franke;
Claas-Christian Wuttke; A. Gross. - In: Proceedings of the 2nd CIRP
International Seminar on Intelligent Computation in Manufacturing. 2000
 
- Integration der operativen Ebenen in Simulationsprojekte / von Helmut
Bley; Christina Franke; Claas-Christian Wuttke. - In: Industrie Management 2/
2000. 2000, S. 13-17
 
- Methods and Tools for the Building of Huge Simulation Models / von Helmut
Bley; Christina Franke; A. Ostermann; Claas-Christian Wuttke. - In:
Proceedings of the 2nd CIRP International Seminar on Intelligent Computation
in Manufacturing. 2000
 
- New strategies and tools for increasing simulation efficiency / von Helmut
Bley; Christina Franke; Claas-Christian Wuttke. - In: Annals of the CIRP, 49
(2000), 1
 
- Solving the Information Management Problem in the Digital Factory / von
Helmut Bley; Christina Franke; Claas-Christian Wuttke. - In: Proceedings of
the 33rd CIRP International Seminar on Manufacturing Systems. 2000, S. 357-362
 
Göken, Mathias
- Eigene_Liste: http://www.uni- saarland.de/fak8/wwm/Members/Goeken/
Goeken_
 
- Atomic force microscopy of metallic surfaces. - In: Advanced Materials &
Processes, 155 (1999), 2, S. 35-37
 
- Grain boundaries and surface diffusion of copper investigated by AFM / von
Thorsten Weber; Michael, Marx; Mathias Göken; Horst Vehoff. - In: Euromat' 99,
Vol.4: Microstructural Investigation and Analysis / Ed.: B. Jouffrey and J.
Svejcar. - Weinheim : Wiley-VCH, 2000, S. 208-213
 
- Microstructural properties of superalloys investigated by nanoindentations
in an atomic force microscope / von Mathias Göken; Markus Kempf. - In: Acta
materialia, 47 (1999), 3, S. 1043-1052
 
- Rasterkraftmikroskopie in der Werkstoffwissenschaft - Beispiele aus der
Metallkunde. - In: Praktische Metallographie, Sonderband 31 / Hrsg.: G.
Schneider; F. Mücklich. - Frankfurt : Werkstoffinformationsgesellschaft, 2000,
S. 25-34
 
Große Gehling, Manfred
- Computer simulations of the temperature dependence of the fracture stress
in notched polycrystals / von Manfred Große Gehling; Horst Vehoff. - In: Mat.
Sci. & Eng. A. 2000, S. 213-224
 
Hamentgen, Michael
- Optimized Fatigue Strength of Porous Coated TiAl5Fe2.5 Samples Produced by
Sintering / von Andreas Hoffmann; Michael Hamentgen; Jürgen Breme. - In:
EUROMAT Vol.2 : Materials for Medical Engineering / ED.: Stallforth Revell. -
Weinheim : WILEY-VCH, 2000, S. 59-64
 
Hartmann, Sylvia
- Mikromagnetische Ermittlung von thermisch induzierten Eigenspannungen in
Stahlen und weißem Gußeisen / von Iris Altpeter; Roman Becking; Rolf Kern;
Michael Kröning; Sylvia Hartmann - In: Eigenspannungen und Verzug durch
Wärmeeinwirkung, hrsg. von Aurich, Dietmar, Kloos, K.-H., DFG-
Forschungsbericht, Wiley-VCH, 1999, S. 407-426
 
Hempelmann, Rolf
- Eigene_Liste: http://
www.bestcolloids.com/papers2.html
 
- Agglomeration of Nano-MgAl2O4 Spinel from Microemulsion and CVD Techniques
/ von Rudolf Winter; Michael Quinten; Andrea Dierstein; Rolf Hempelmann; A.
Altherr; Michael Veith. - In: J. Appl. Cryst, 33 (2000), S. 507-510
 
- Apparent Band Shift of Cr3+-Doped Titania as Observed by Photoacoustic and
Impedance Spectroscopy / von Hans Dieter Breuer; Holger Wittmer; Jürgen
Engeldinger; Rolf Hempelmann. - In: Zeitschrift für Physikalische Chemie, 214
(2000), 6
 
- Band Shift of Cr3+-Doped Titania as Observed by Photoacoustic and
Impedance Spectroscopy / von Holger Wittmer; Jürgen Engeldinger; Rolf
Hempelmann; Hans Dieter Breuer. - In: Zeitschrift für Physikalische Chemie,
214 (2000), S. 709-720
 
- Characterization of monodisperse colloidal particles: a comparison between
SAXS and DLS / von Joachim Wagner; Wolfram Härtl; Rolf Hempelmann. - In:
Langmuir, 16 (2000), S. 4080-4085
 
- Dissociative Water Vapour Absorption in BaZr0.85 Y0.15 O2.95/H2O: Pressure/
Composition Isotherms in Terms of Fermi-Dirac-Statistics / von Bodo Groß;
Jürgen Engeldinger; Dieter (NHS) Grambole; F. (NHS) Herrmann; Rolf Hempelmann.
- In: Physical Chemistry Chemical Physics, 2 (2000), S. 297-301
 
- Grain Growth Kinetics of Nanocrystalline Iron Studied in-situ by
Synchrotron Real-Time X-Ray Diffraction / von Harald Natter; Martin Schmelzer;
Marc-Simon Löffler; Carl Krill; A. Fitch; Rolf Hempelmann. - In: Journal of
Physical Chemistry B, 104 (2000), S. 104
 
- In-situ X-ray Crystallite Growth Study on Nanocrystalline Fe / von Harald
Natter; Martin Schmelzer; Marc-Simon Löffler; Rolf Hempelmann. - In: Material
Science Forum, 343-346 (2000), S. 683-688
 
- Magnetic Properties of Grain Boundaries and Precipitates in
Nanocrystalline Ni and Ni-Cu Alloys / von Herbert Wolf; Zhiqun Guan; Harald
Natter; Martin Schmelzer; Rolf Hempelmann; Thomas Wichert. - In: Material
Science Forum, 343-346 (2000), S. 847-852
 
- MuSr-Experiments on Proton Conducting Oxides / von Bernhard Heisel; Rolf
Hempelmann; Ola (NHS) Hartmann; Roger (NHS) Waeppling. - In: Physica B, 289-
290 (2000), S. 487-490
 
- Neutron Diffraction Studies of the Ba3Ca1+yNb2-yO9-delta+xD2O High
Temperature Proton Conductor / von Izabela (NHS) Sosnowska; W. (NHS) Schäfter;
Radoslaw (NHS) Przenioslo; Katja (NHS) Lind; Rolf Hempelmann. - In: Physica B,
276-278 (2000), S. 864-865
 
- Quasielastic Neutron Scattering Study of H Motion in the Hydrogen-
Stabilized C15-Type Phases HfTi2Hx and ZrTi2Hx / von Alexander V. (NHS)
Skripov; J. (NHS) Combet; H. (NHS) Grimm; Rolf Hempelmann; V. N. (NHS)
Kozhanov. - In: Journal of Physics: Condensed Matter, 12 (2000), S. 3313-3324
 
- Quasielastic Neutron Scattering and Solid State Diffusion : Oxford Series
on Neutron Scattering in Condesed Matter 13. - Oxford : Clarendon Press
Oxford, 13 (2000), S. 1-304
 
- SAXS Study on Agglomeration of nano-MgAl2O4 Spinel from Microemulsion and
CVD Techniques / von Rudolf Winter; Michael Quinten; Andrea Dierstein; Rolf
Hempelmann; A. Altherr; Michael Veith. - In: Journal of Applied
Crystallography, 33 (2000), S. 507-510
 
- Self-Diffusion and Hydrodynamic Interactions in Highly Charged Colloids /
von Wolfram Härtl; Joachim Wagner; Christian Beck; Frank Gierschner; Rolf
Hempelmann. - In: Journal of Physics: Condensed Matter, 12 (2000), A287-A293
 
- Size Dependence of Optical Phonons inYttria Nanoparticles by Means of
Raman Light Scatterin / von Christian Beck; Christian Bruch; Karl-Heinz Ehses;
Rolf Hempelmann. - In: Journal of Physics IV France, 10 (2000), S. Pr 7-87 -
Pr 7-90
 
- Stucture and Dynamics of Nanocrystals. - In: Frontiers of Neutron
Scattering. - Singapore, New Jersey, London, Hong Kong : World Scientific,
2000, S. 229-246
 
- Time-of-Flight Spectrometer FOCUS at SINQ: First Results / von Stefan
(NHS) Janssen; Felix (NHS) Altorfer; Lothar Holitzner; Rolf Hempelmann. - In:
Physica B, 276-278 (2000), S. 89-90
 
Hoffmann, Andreas
- Modeling of the Ablation Source in Laser-Ultrasonics. (Review of Progress
in Quantitative Nondestructive Evaluation, 25.-30. July, 1999, Montreal,
Canada) / von Andreas Hoffmann; Walter Arnold - In: Chimenti, Dale E. (Ed.);
Thompson, Donald O. (Ed.): Review of Progress in Quantitative Nondestructive
Evaluation. 19A Melville, New York : American Institute of Physics (AIP),
2000, S. 279-286 (AIP Conference Proceedings 509)
 
- Optimized Fatigue Strength of Porous Coated TiAl5Fe2.5 Samples Produced by
Sintering / von Andreas Hoffmann; Michael Hamentgen; Jürgen Breme. - In:
EUROMAT Vol.2 : Materials for Medical Engineering / ED.: Stallforth Revell. -
Weinheim : WILEY-VCH, 2000, S. 59-64
 
- Tailor-Made composites Based on Titanium for medical Devices / von Jürgen
Breme; Volker Biehl; Andreas Hoffmann. - In: Advanced Eng.Materials. 2000, 2,
S. 270-274
 
Jonschker, Gerhard
- The sol-gel process as a basic technology for nanoparticle-dispersed
inorganic-organic composites / von Helmut Schmidt; Gerhard Jonschker; Stefan
Goedicke; Martin Mennig. - In: Journal of sol-gel science and technology, 19
(2000), S. 39-51
 
Jung, Dieter
- Design and Application of a Quality Management Network Model for the
Assurance of Quality Affecting Processes Demonstrated in the Case of Powder
Metallurgy / von Helmut Bley; Dieter Jung. - In: Proceedings of the 31th CIRP
International Seminar on Manufacturing Systems. 1998
 
- Modelling Quality in Complex Processes - Opimization of a Powder
Metallurgical Process using DoE / von Helmut Bley; Dieter Jung; P. Klär. - In:
International Conference on Quality Manufacturing. 1999
 
Kempf, Markus
- Microstructural properties of superalloys investigated by nanoindentations
in an atomic force microscope / von Mathias Göken; Markus Kempf. - In: Acta
materialia, 47 (1999), 3, S. 1043-1052
 
Meng, Xingkang
- Hard multilayered thin films of metal-intermetallic Ni/Ni3Al / von
Xingkang Meng; Horst Vehoff. - In: Journal of Materials Research, 15 (2000),
No. 12, S. 2595-2597
 
Mücklich, Frank
- Intelligente Suche nach Ätzrezepturen für Werkstoffe / von Gerhard Weikum;
Christian Mähler; Frank Mücklich. - In: 8. GI-Fachtagung über Datenbanksysteme
in Büro, Technik und Wissenschaft, Freiburg, 1999. - Berlin : Springer, 1999,
S. 69-79. - (Informatik aktuell)
 
- Investigations of Vibration Induced Particle Segregation for the
Processing of FGM. (International Symposium on Functionally Graded Materials) /
von Frank Mücklich; Silke Beinstingel; Walter Arnold - In: Kaysser W.A.
(Hrsg.) ; Institute of Materials Science; German Aerospace Center (DLR):
Functionally Graded Materials 1998 : Proceedings of the 5th International
Symposium on Functionally Graded Materials Hampshire : Trans Tech
Publications, 1999, S. 25-30
 
Muth, Michael
- KUE-Online - A Data-Management-System Supporting the Handling of Design
Exercises / von Michael Muth; Christian Weber. - In: Design 2000 - 6th
International Design Conference, Dubrovnik/Kroatien .05.2000.Proceedings of
Design 2000 (herausgegeben von D. Marjanovic). 2000, S. 471-476
 
Oltermann, Ralf
- Determination of technological data during NC programming based on CAD-
integrated tolerances / von Helmut Bley; Ralf Oltermann. - In: Proceedings of
the 14th International Conference on Computer-Aided Production Engineering.
1998
 
- Distributed Model Management System for Material Flow Simulation / von
Helmut Bley; Ralf Oltermann; Claas-Christian Wuttke. - In: Proceedings of the
15th International Conference on Computer-Aided Production Engineering. 1999,
S. 657-662
 
Possart, Wulff
- Eigene_Liste: http://www.uni- saarland.de/fak8/wwthd/
publications.uk.html
 
- Adhesion and structure of epoxies in ultrathin films / von Wulff Possart;
Bernd Valeske. - In: Preprints, EURADH `2000 5th European Adhesion Conference,
Société Française d'Adhésion, Dechema e.V., Fachsektion Klebtechnik,
Deutschland, The Institute of Materials, UK, Lyon, France, 18.-21.9.00. 2000,
S. 293-298
 
- Does non-linear ultrasound detect ageing of adhesive bonds before failure?
/ von Clemens Bockenheimer; Davis Fata; Wulff Possart; M. Rothenfußer. - In:
Preprints, EURADH `2000 5th European Adhesion Conference, Société Française
d'Adhésion, Dechema e.V., Fachsektion Klebtechnik, Deutschland, The Institute
of Materials, UK, Lyon, France, 18.-21.9.00. 2000, S. 634-638
 
- Eigenschaften von Al-Epoxid-Klebungen nach mechanischer
Oberflächenvorbehandlung / von Clemens Bockenheimer; Torsten Neeb; Wulff
Possart; Bernd Valeske. - In: Proceedings 14. Internat. Symposium
"SWISSBONDING '00", 16. - 18.05.2000. - Rapperswil, Schweiz, 2000, S. Poster
Nr. 11
 
- The influence of mechanical pretreatment on the polymer structure of
adhesive bonds / von Clemens Bockenheimer; Wulff Possart; Bernd Valeske. - In:
Preprints, EURADH `2000 5th European Adhesion Conference, Société Française
d'Adhésion, Dechema e.V., Fachsektion Klebtechnik, Deutschland, The Institute
of Materials, UK, Lyon, France, 18.-21.9.00. 2000, S. 88-94
 
- Influences from metal surfaces on the curing of polymer adhesives / von
Clemens Bockenheimer; Wulff Possart; Bernd Valeske. - In: Proc., 1. Internat.
Symposium on "Reactive Polymers in Inhomogeneous Systems, in Melts and at
Interfaces", Dresden, 16. - 19.07.2000. - Dresden, 2000, L31
 
- Die Interphase zwischen GFK-Oberflächen beim Laminieren nach mechanischer
Oberflächenvorbehandlung / von Asa Ronkvist; Wulff Possart; V. Banhardt. - In:
Proceedings 14. Internat. Symposium "SWISSBONDING '00", 16. - 18.05.2000. -
Rapperswil, Schweiz, 2000, S. Poster Nr. 12
 
- Molcular modelling of interphases / von Wulff Possart; Bernd Schneider. -
In: Proceedings of the 6th International Conference on Adhesion and Surface
Analysis, 18.-20.4.2000. - Loughborough University, England, 2000, S. 14
 
- Polycyanurate thin film deposition on metals via thermal
cyclotrimerisation from the monomer vapour phase / von O.F. Pozdnyakov; Wulff
Possart; B.P. Redkov; Bernd Valeske; M.M. Moiseeva; A.O Pozdnyakov. - In: Thin
Solid Films, 366 (2000), S. 1-3
 
- Reaktive Polymere auf Metallen - was geschieht in der Phasengrenze. - In:
Verhandlungen der Deutschen Physikalischen Gesellschaft, 4 (2000), S. 817-
 
- Surface modification of metals by mechanical pretreatments / von Clemens
Bockenheimer; Walter Brockmann; Torsten Neeb; Wulff Possart; Bernd Valeske. -
In: Proceedings of the 23rd Annual Meeting of the Adhesion Society 2000 / Ed.:
Anderson, G.L. - Myrtle Beach, South Carolina : The Adhesion Society, 2000, S.
437-440
 
Thiele, Wolf-Rüdiger
- Eigene_Liste: http://www.uni-saarland.de/fak8/wwm/
Publications/wwm_publications_e.html
 
- Naturwissenschaftliche Untersuchungsverfahren und Auswertung von
Keramikproben aus er Grabung Sehndorf. - In: Archäologische Untersuchungen im
Trassenverlauf der Bundesbahn A8 im Landkreis Merzig-Wadern : Bericht der
Staatl. Denkmalpflege im Saarland, Abt. Bodendenkmalpflege, Beiheft 4 / Hrsg.:
Miron, A. - Saarbrücken : Staatl. Konservatoramt Saarbrücken, 2000, S. 345-380
 
Valeske, Bernd
- Adhesion and structure of epoxies in ultrathin films / von Wulff Possart;
Bernd Valeske. - In: Preprints, EURADH `2000 5th European Adhesion Conference,
Société Française d'Adhésion, Dechema e.V., Fachsektion Klebtechnik,
Deutschland, The Institute of Materials, UK, Lyon, France, 18.-21.9.00. 2000,
S. 293-298
 
- Eigenschaften von Al-Epoxid-Klebungen nach mechanischer
Oberflächenvorbehandlung / von Clemens Bockenheimer; Torsten Neeb; Wulff
Possart; Bernd Valeske. - In: Proceedings 14. Internat. Symposium
"SWISSBONDING '00", 16. - 18.05.2000. - Rapperswil, Schweiz, 2000, S. Poster
Nr. 11
 
- The influence of mechanical pretreatment on the polymer structure of
adhesive bonds / von Clemens Bockenheimer; Wulff Possart; Bernd Valeske. - In:
Preprints, EURADH `2000 5th European Adhesion Conference, Société Française
d'Adhésion, Dechema e.V., Fachsektion Klebtechnik, Deutschland, The Institute
of Materials, UK, Lyon, France, 18.-21.9.00. 2000, S. 88-94
 
- Influences from metal surfaces on the curing of polymer adhesives / von
Clemens Bockenheimer; Wulff Possart; Bernd Valeske. - In: Proc., 1. Internat.
Symposium on "Reactive Polymers in Inhomogeneous Systems, in Melts and at
Interfaces", Dresden, 16. - 19.07.2000. - Dresden, 2000, L31
 
- Polycyanurate thin film deposition on metals via thermal
cyclotrimerisation from the monomer vapour phase / von O.F. Pozdnyakov; Wulff
Possart; B.P. Redkov; Bernd Valeske; M.M. Moiseeva; A.O Pozdnyakov. - In: Thin
Solid Films, 366 (2000), S. 1-3
 
- Surface modification of metals by mechanical pretreatments / von Clemens
Bockenheimer; Walter Brockmann; Torsten Neeb; Wulff Possart; Bernd Valeske. -
In: Proceedings of the 23rd Annual Meeting of the Adhesion Society 2000 / Ed.:
Anderson, G.L. - Myrtle Beach, South Carolina : The Adhesion Society, 2000, S.
437-440
 
Vehoff, Horst
- Eigene_Liste: http://www.uni-saarland.de/fak8/wwm/
Publications/wwm_publications_e.html
 
- Computer simulations of the temperature dependence of the fracture stress
in notched polycrystals / von Manfred Große Gehling; Horst Vehoff. - In: Mat.
Sci. & Eng. A. 2000, S. 213-224
 
- Grain boundaries and surface diffusion of copper investigated by AFM / von
Thorsten Weber; Michael, Marx; Mathias Göken; Horst Vehoff. - In: Euromat' 99,
Vol.4: Microstructural Investigation and Analysis / Ed.: B. Jouffrey and J.
Svejcar. - Weinheim : Wiley-VCH, 2000, S. 208-213
 
- Hard multilayered thin films of metal-intermetallic Ni/Ni3Al / von
Xingkang Meng; Horst Vehoff. - In: Journal of Materials Research, 15 (2000),
No. 12, S. 2595-2597
 
Wack, Thilo
- Mechanische und klinische Aspekte bei koronaren Stents / von Volker Biehl;
Thilo Wack; Ulrich Theo Seyfert; Jürgen Breme. - In: Berichtsband
"Implantologie: Mechanische und klinische Aspekte von Implantaten" : 2. Tagung
des DVM-Arbeitskreises "Biowerkstoffe". - Berlin : DVM, 2000, S. 171-180
 
- Tailored Composite Titanium-Based Biomaterials / von Jürgen Breme; Volker
Biehl; Thilo Wack; Eva Eisenbarth. - In: Tailored Composite Titanium-Based
Biomaterials : Titanium `99 Science and Technology, Proc. of the Ninth World
Conf. on Titanium / Ed.: Garynin Ushkov. - St. Petersburg : CRISM, Prometey,
2000, S. 1187-1194
 
Weber, Christian
- Eigene_Liste: http://
www.cad.uni-sb.de/staff/weber/
 
- Calixochromes: Synthesis, Structure , Supramolecular Effects of
Biphotochromic Calix[4]arenes / von Christian Weber; Roland Bonneau; Heinz
Dürr. - In: Synthesis, 6 (1999), S. 1005-1012
 
- KUE-Online - A Data-Management-System Supporting the Handling of Design
Exercises / von Michael Muth; Christian Weber. - In: Design 2000 - 6th
International Design Conference, Dubrovnik/Kroatien .05.2000.Proceedings of
Design 2000 (herausgegeben von D. Marjanovic). 2000, S. 471-476
 
- Problem-Adapted Mesh Generation with FEM-Features / von Horst Werner;
Christian Weber; Martin Schilke. - In: Design 2000 - 6th International Design
Conference, Dubrovnik/Kroatien .05.2000.Proceedings of Design 2000
(herausgegeben von D. Marjanovic). 2000, S. 383-388
 
Werner, Horst
- Problem-Adapted Mesh Generation with FEM-Features / von Horst Werner;
Christian Weber; Martin Schilke. - In: Design 2000 - 6th International Design
Conference, Dubrovnik/Kroatien .05.2000.Proceedings of Design 2000
(herausgegeben von D. Marjanovic). 2000, S. 383-388
 
Wuttke, Claas-Christian
- Automatic Solution Generator for Complex Logistical Planning Problems /
von Helmut Bley; Claas-Christian Wuttke; M. Kontz. - In: Proceedings of the
CIRP International Seminar on Intelligent Computation in Manufacturing
Engineering. 1998, S. 297-302
 
- Automation of Simulation Studies / von Helmut Bley; Christina Franke;
Claas-Christian Wuttke; A. Gross. - In: Proceedings of the 2nd CIRP
International Seminar on Intelligent Computation in Manufacturing. 2000
 
- Distributed Model Management System for Material Flow Simulation / von
Helmut Bley; Ralf Oltermann; Claas-Christian Wuttke. - In: Proceedings of the
15th International Conference on Computer-Aided Production Engineering. 1999,
S. 657-662
 
- Integration der operativen Ebenen in Simulationsprojekte / von Helmut
Bley; Christina Franke; Claas-Christian Wuttke. - In: Industrie Management 2/
2000. 2000, S. 13-17
 
- Materialflußsimulation verbessert Logistik / von Helmut Bley; Peter Braun;
Claas-Christian Wuttke. - In: Bleche Rohre Profile, 9 (1999), S. 46-53
 
- Methods and Tools for the Building of Huge Simulation Models / von Helmut
Bley; Christina Franke; A. Ostermann; Claas-Christian Wuttke. - In:
Proceedings of the 2nd CIRP International Seminar on Intelligent Computation
in Manufacturing. 2000
 
- Multiple use of simulation models for production systems / von Helmut
Bley; Claas-Christian Wuttke. - In: Proceedings of the 32nd CIRP International
Seminar on Manufacturing Systems. 1999, S. 379-388
 
- New strategies and tools for increasing simulation efficiency / von Helmut
Bley; Christina Franke; Claas-Christian Wuttke. - In: Annals of the CIRP, 49
(2000), 1
 
- Simulation als Werkzeug zur Optimierung inner- und zwischenbetrieblicher
Logistik in der Blechverarbeitung / von Helmut Bley; Peter Braun; Claas-
Christian Wuttke. - In: Tagungsband zum EFB-Kolloquium '99. 1999
 
- Solving the Information Management Problem in the Digital Factory / von
Helmut Bley; Christina Franke; Claas-Christian Wuttke. - In: Proceedings of
the 33rd CIRP International Seminar on Manufacturing Systems. 2000, S. 357-362